No Compromise Studio Monitor Systems "Designed By Audio Engineers for Audio Engineers"
GS-XD4080 DSP Processor
Guzauski-Swist GS-XD4080 DSP Processor: The Guzauski-Swist GS-XD4080 DSP Processor is an integral component of the GS-3a Studio Monitor System. Intended for professional use, the system also offers the end user a high degree of room frequency compensation through its front end DSP processor. This allows for very precise integration into the acoustical environment in which it is installed. The user can select analog or digital signal for input and output channel. If using AES/EBU the Guzauski-Swist GS-XD4080 DSP Processor accepts any sample rate on the Inputs and will automatically up sample to its internal clock. The GS-XD4080 DSP Processor has a fixed output sample rate of 96kHz. Guzauski-Swist GS-XD4080 DSP Processor allows the end user to access the following: Digital or Analog Input settings Access Input EQ (Parametric & Graphic) Access Delay settings Select Input Gain Change Presets (Save and Load User Presets) GS-XD4080 Factory Preset Selection Available Factory Loaded Presets: Flat + 2 dB @ 80Hz Shelf - 2 dB High Frequency Shaping - 2 dB @ 80 Hz and – 2 dB High Frequency Shaping Flat plus 12 dB/Oct Hi Pass @ 20Hz + 2 dB @ 80Hz Shelf plus 12 dB/Oct Hi Pass @ 20Hz - 2 dB High Frequency Shaping plus 12 dB/Oct Hi Pass @ 20Hz - 2 dB @ 80 Hz and – 2 dB High Frequency Shaping plus 12 dB/Oct Hi Pass @ 20Hz Guzauski-Swist GS-XD4080 DSP Processor – PC Control Software “G-S DSP”: The Guzauski-Swist GS-XD4080 DSP Processor is shipped with a special PC Graphic User Interface (GUI) application – referred to in the software as the Guzauski-Swist GS-XD4080 DSP Processor “G-S DSP “. The “G-S DSP” gives the user an option to control the unit from a remote PC. The GUI application makes it much easier to control and monitor the device, allowing the user to get the whole picture on one screen. Programs can be recalled and stored from/to PCʼs hard drive, thus expanding the storage to become virtually limitless. “G-S DSP” can be connected to the GS-XD4080 via RS232, USB or Ethernet.